Checklist to Hire a Brick Pointing Service Provider

Any masonry-based building, whether made of brick, stone, clay, or concrete, will eventually need repairs. While many choose masonry because of its durability and ability to last for many years, exposure to the elements and progressive structure movement can eventually cause the stonework to deteriorate.

The most frequent maintenance procedure you can carry out on your building yourself (or hire a professional for) is “pointing.” If you want to know about the checklist to hire a brick-pointing service provider, this article will come in handy!

What is Brick Pointing?

Brick pointing, which entails filling mortar joints to complete them during building, takes place when the brick is freshly laid. It’s unlikely that you’ll require expert aid with pointing unless you’re creating a whole new structure. In brick or stone masonry construction, pointing is the process of completing mortar joints.

Types of Brick Pointing

In the era of modern construction, there are many different kinds of brick pointing services provided –

• Flush Pointing: This method involves pressing the mortar firmly into the raking joints and completing it flush with the masonry units’ edges. With a trowel and straight edge, the edges are precisely trimmed. It does not look attractive. But because flush pointing resists the creation of room for dust, water, etc., it is more durable and is therefore often utilized.
• Recessed Pointing: In this instance, mortar is pushing back from the edges by at least 5mm. A suitable instrument is used to keep the pointed face vertical while the mortar is being applied. This kind has an excellent appearance.
• Beaded Pointing: It has a steel or iron concave edge. Despite having a beautiful appearance, it is more prone to injury than other varieties.
• Struck Pointing: This is a variation on flush pointing where the face is kept slanted and the upper edge is pressed 10mm inside the face to provide easy drainage of water.
• Rubbed, Keyed, or Grooved Pointing: This is another variation of flush pointing when a groove is created by a pointing tool at its mid-height. It has a nice appearance.
• Tuck Pointing: In this instance, the mortar is applied first to the raking joint and then flush with the face. When the pressed mortar is still green, a 5 mm wide by 3 mm deep groove or narrow channel is cut through the middle of the groove. White cement putty is next poured into the groove, being sure to keep it 3 millimeters away from the joint’s face. It is referred to as bastard pointing or half tuckpointing when the projection is carried out in mortar.

These are some of the most popular types of pointing methods.

Checklist to Hire a Brick Pointing Service Provider

Brick-pointing is a labor-intensive process, but Excellence Construction will have your brick wall looking beautiful in no time. You will receive a service that is the result of their fifteen years of experience, competence, knowledge, and cutting-edge procedures.

Excellence Construction not only employs cutting-edge equipment, materials, techniques, and methods but also develops customized solutions for your brick walls and your brick-pointing problems.

While brick pointing, following some steps, is necessary:

• Removing the Old Mortar: Because the mortar is subjected to more pressure than the bricks around it, mortar should degrade over time. Before repairs can be completed, damaged sections must be removed as mortar weakens and starts to melt and flake off. Applying repairs over broken masonry is the last thing you should do because it will only lead to tragedy. To remove broken mortar and prepare the area for repairs, several instruments, usually a chisel and mallet, can be employed.
• Cleaning the Mortar: It’s time to clean up the neat little pocket you’ve made in the masonry once the damaged mortar has been removed to the proper levels. With a wire brush, remove any dust and dirt to free any residue that has become lodged in joints. To ensure that the area is well cleaned up and prepared for success, professional masons carry a variety of tools on standby.
• Research for the Appropriate Mortar: The original mortar should be as similar to the replacement mortar as feasible, both in terms of color and in terms of strength, and structure. It becomes increasingly challenging to get the perfect blend the older a building is. If you need assistance finding the ideal mortar for your brick wall, contact Excellence Constructions.
• Applying the Mortar: For best outcomes, the ideal moisture level must exist. To guarantee a smooth and consistent consistency, mortar is thoroughly mixed before application. The joints are subsequently filled with fresh mortar using a tuck-pointing trowel. To get the neatest appearance possible, the area is packed tightly, and perfectly flattened, and surplus mortar is eliminated.

Contact Excellence Constructions for a smooth brick-pointing process!

Read Also: Which Chemical Is Used for Wall Waterproofing

Why Brick Pointing is Necessary

Brick-pointing is essential for maintaining commercial and residential buildings because it supports the weight distribution of the structure. Bricks with uneven or cracked mortar may carry too much weight because mortar helps the bricks distribute weight on an even plane.

Cracking, swelling, and even collapse result from this. Additionally, inadequate brick pointing might allow moisture to cause harm. Many types of moisture damage won’t become apparent until they are too late to be repaired, necessitating expensive replacement or repairs. Brick-pointing should be done carefully on a new building to ensure that the work lasts as long as possible.

Even though brick is a durable material, the deteriorated mortar will eventually lead it to break. Small brick cracks may not seem alarming, but they are a symptom of unequal weight distribution. This makes your structure more vulnerable to invasions from pests, water, algae, and mold.